Draining a Pond — Good Intentions

Draining a Pond

It seems like all I write about these days is rain and the effects on our property. In a slight twist, I’m going to talk about the excessive amount of rain at home and the effect of it on our neighbour’s pond. Michael and Bev’s pond takes the overflow from our pond. Their pond then drains through a 30cm wide pipe to the bush further down their property. This pipe could not cope with volume of rain we received in the past few days and the resulting debris clogged up the pipe. This resulted in a full “up to the brim” pond with mini streams flowing out of the pond trying to escape.


With further heavy downpour expected, we needed to clear the blockage to maintain the level of the pond and protect the surrounding area. Chris, Michael and I then got down to clearing the pipe. Our plan was to thread a chain of ropes in progressive levels of thickness through the pipe and floss the blockage out. We pushed two hoses down one end of the pipe to provide a clear channel for us to feed the first of the rope, the thinnest of all, through with a guiding wire. Once through, we tied the next section of rope to the end of the first rope and continued to pull the rope through.

We started the flossing action at the end of the work day. In winter, we lose light fast and we raced against time to clear the passageway before it got too dark to see anything.


The thing is that rope has a mind of its own. It is the same with all ropes. Left alone, it loves to cuddle and tie itself up in knots. But a knotted rope is nothing in the face of team work and knot masters

We’re halfway there. The rope has passed through the pipe. We now need the gator to pull the heavy and thick rope through to floss the pipe.

Two hours after we started, success.

It was so dark that we needed a torch to light the outflow and 5000 iso.